Description
Medical protective mask (Non Sterile)
Instruction for Use
[Product Name]
Medical protective mask (Not Sterile)
[Standard] GB19083-2010, EN 14683:2019 Type IIR
[Mode] YK-F204
[Type specification] Closed arch MA type
[Size: Size] 14cm (±1) x 12cm (±1)
[Expiry]
2 years.
[Production Date]
MFG 2020/10/24
[Production Batch]
2020/10/02
[Intended use]
The Medical protective mask is designed to protect
patients and health care workers from the spread of
microorganisms, body fluids and particulates, and
to provide better tightness and reparability.
(It can not be used in places with strict microbiological control
requirements such as intensive care room and operating room)
[Instructions]
spread the mask, pull both hands towards the face, hold the mask with
the left hands, wrap the rope around the ear with the right hand, wrap
the rope around the ear with the left hand pull the edge of the mask.
with both hands up and down, cover the face and chin.
[Structural composition]
This product consists of mask cloth, nose clip and ear band. The inner
and outer layers of the mask cloth are made of non-woven cloth, the
interlayer is made of ultra-fine polypropylene filter cloth, the nose clip
is made of bendable aluminum, and the ear band is made of elastic belt
(Nylon + spandex).
[ Intended use]
It is applicable to the protection of medical staff and relevant staff
against respiratory infectious diseases transmitted by air. (it can not be
used to isolate places with strict microbiological index control such as
ICU and operating room)
[Contraindications]
It is forbidden for those who are allergic to product materials
[ Directions for use]
Open the package, take out the mask, straighten the nose bridge card,
press the nose bridge card on it, put on the mask, adjust the nose
bridge card along the nose bridge with the fingertips of both hands,
from the middle to both sides, slowly press inward until it is close to
the nose bridge and face.
[Precautions]
1. Read the manual carefully before use.
2. Single use only.
3. Discard the used product as medical waste.
4. It is forbidden to use the product if the package seals disconnected,
damaged or beyond the validity period of the product.
[Expiry] 2years.
[ Medical Device Registration Certificate Number]
[ Symbol Description ]
Caution, Indicates the need for the user to consult the
instructions for use for important cautionary information,
such as warnings and precautions that cannot for a variety
of reasons, be presented on the medical device itself
Authorized representative in the European Community, Indicates
the Authorized representative in the European Community.
CE Mark: conforms to essential requirements of the Medical
Device Regulation 2017/745(EU).
Date of manufacture, Indicates the date when the medical device was manufactured.
Manufacturer, Indicates the medical device manufacturer, as defined in Medical
Use-by date, Indicates the date after which the medical
device is not to be used.
Do not re-use, indicates a medical device that is intended for one
use, or for use on a single patient during a single procedure.
Do not use if package is damaged, indicates a medical device that
should not be used if the package has been damaged or opened.
Batch code, Indicates the manufacturer's batch code so that
the batch or lot can be identified.
Keep away from sunlight, indicates a medical device that
needs protection from light sources.
Keep dry, indicates a medical device that needs to be
protected from moisture.
[Storage conditions]
The product shall be stored in a well ventilated room with relative
humidity no more than 80% and no corrosive substances.
Date of manufacture, Indicates the date when the medical device was manufactured
Manufacturer, Indicates the medical device manufacturer, as defined in Medical
Device Regulation 2017/745 (EU)
Use by date, Indicates the date after which the medical device is not to be used
Do not re-use, indicates a medical device that is intended for one use,
or for use on a single patient during a single procedure.
Do not use if package is damaged, indicates a medical device that should
not be used if the package has been damaged or opened.
Batch code, indicates the manufacturer's batch code so that the batch or
lot can be identified.
Keep away from sunlight, indicates a medical device that needs protection
from light sources.
Keep dry, indicates a medical device that needs to be protected from moisture.